Configuring Logging And Logging Correlation; Logging Locations And Severity Levels - Cisco CRS-1 - Carrier Routing System Router Getting Started Manual

Chapter 5 Initial Configuration of the Cisco IOS XR Software
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# clock timezone pst -8
RP/0/RP0/CPU0:router(config)# commit
RP/0/RP0/CPU0:router(config)# end
RP/0/RP0/CPU0:router# clock set 14:12:00 10 feb 2004
14:12:00.090 PST Tue Feb 10 2004
RP/0/RP0/CPU0:router# clock update-calendar
RP/0/RP0/CPU0:router# show clock
14:12:00.090 PST Tue Feb 10 2004
Related Documents
Related Topic
Descriptions of the clock commands available in the
Cisco IOS XR software
Commands used to configure the NTP
Configuration of the NTP on the Cisco IOS XR software

Configuring Logging and Logging Correlation

System messages generated by the Cisco IOS XR software can be logged to a variety of locations based
on the severity level of the messages. For example, you could direct information messages to the system
console, and also log debugging messages to a network server.
In addition, you can define correlation rules that group and summarize related events, generate complex
queries for the list of logged events, and retrieve logging events through an XML interface.
The following sections describe logging and the basic commands used to log messages in
Cisco IOS XR software:
•
•
•

Logging Locations and Severity Levels

Error messages can be logged to a variety of locations, as shown in
Table 5-3
Logging Destination
console
vty terminal
external syslog server
internal buffer
Logging Locations and Severity Levels, page 5-11
Alarm Logging Correlation, page 5-12
Configuring Basic Message Logging, page 5-12
Logging Locations for System Error Messages
Configuring Logging and Logging Correlation
Document Title
"Clock Commands on Cisco IOS XR Software" in
Cisco IOS XR System Management Command
Reference
"NTP Commands on Cisco IOS XR Software" in Cisco
IOS XR System Management Command Reference
"Implementing NTP on Cisco IOS XR Software" in
Cisco IOS XR System Management Configuration
Guide
Command (Global Configuration Mode)
logging console
logging monitor
logging trap
logging buffered
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Table 5-3.
5-11