Cisco CRS-1 - Carrier Routing System Router Getting Started Manual page 143

Chapter 6 Managing Cisco IOS XR Software Packages
Displaying the Active Packages for All Cards
In the following example, the active packages for all cards in the system are shown:
RP/0/RP0/CPU0:router# show install active
Node 0/1/SP [SP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/sp/mbihfr-sp.vm
Active Packages:
Node 0/1/CPU0 [LC]
Boot Image: /disk0/hfr-os-mbi-1.0.0/lc/mbihfr-lc.vm
Active Packages:
Node 0/2/SP [SP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/sp/mbihfr-sp.vm
Active Packages:
Node 0/2/CPU0 [LC]
Boot Image: /disk0/hfr-os-mbi-1.0.0/lc/mbihfr-lc.vm
Active Packages:
Node 0/3/SP [SP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/sp/mbihfr-sp.vm
Active Packages:
Node 0/3/CPU0 [LC]
Boot Image: /disk0/hfr-os-mbi-1.0.0/lc/mbihfr-lc.vm
Active Packages:
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
disk0:hfr-mpls-1.0.0
disk0:hfr-mcast-1.0.0
disk0:hfr-lc-1.0.0
disk0:hfr-fwdg-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
disk0:hfr-mpls-1.0.0
disk0:hfr-mcast-1.0.0
disk0:hfr-lc-1.0.0
disk0:hfr-fwdg-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
disk0:hfr-mpls-1.0.0
disk0:hfr-mcast-1.0.0
disk0:hfr-lc-1.0.0
disk0:hfr-fwdg-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Package Management Procedures
6-21