Browsing Display Output When The --More-- Prompt Appears; Halting The Display Of Screen Output; Redirecting Output To A File - Cisco ASR 9000 Getting Started Manual

Chapter CLI Tips, Techniques, and Shortcuts
Table 24 Common show Commands in Cisco IOS XR Software (continued)
Command
show platform (EXEC mode)
show platform (administration
EXEC mode)
show environment
For more information on the use of these commands, see the

Browsing Display Output When the --More-- Prompt Appears

When command output requires more than one screen, such as for the ?, show, or more commands, the
output is presented one screen at a time, and a
To display additional command output, do one of the following:
•
•
The following example shows one screen of data and the
RP/0//CPU0:router# show ?
If you do not see the
Tip
length command in EXEC mode. Command output is not paused if the length value is set to zero. The
following example shows how to set the terminal length:
RP/0//CPU0:router# terminal length 20
For information on searching or filtering CLI output, see the
on page

Halting the Display of Screen Output

To interrupt screen output and terminate a display, press Ctrl-C, as shown in the following example:
RP/0//CPU0:router# show running-config
<Ctrl-C>

Redirecting Output to a File

By default, CLI command output appears on the screen. CLI command output can be redirected to a
user-specified file by entering a filename and location after the show command syntax. The following
command syntax is used to redirect output to a file:
OL-28417-02
Description
Displays information about cards and modules assigned to the to
which you are connected.
Displays information about all cards and modules in the router.
Displays hardware information for the system, including fans,
LEDs, power supply voltage and current, and temperatures. Enter
show environment ? to see additional command options.
Press Return to display the next line.
Press Spacebar to display the next screen of output.
--More--
118.
prompt appears at the bottom of the screen.
--More--
prompt, try entering a value for the screen length with the terminal
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
Displaying System Information with show Commands
"Related Documents" section on page
prompt:
--More--
"Filtering show Command Output" section
Command Mode
EXEC mode
administration
EXEC mode
EXEC mode or
administration
EXEC mode
x.
115