Manual Fixtures - PROEL PLBR256MH2 - REV 07-2006 Manual

Press the MENU button until the message "SP" appears in the display. Use [▲] / [▼]
buttons to select the speed within 1-99 for the current program. A value of 01 will give
you the slowest speed and 99 will give you the fastest speed.
Press the MENU button until message "di" appears in the sidply. Use [▲] / [▼] buttons to
select the intensity within 1-99 fort the program. Avalue 01 gives the lowest putpu and
99 give full intensity.
The FULL ON button is used to bring the overall output to full intensity. This function is
enables when the FULL ON button is pressed down and disable when set free. Press the
STANDBY button to activate Stanby mode. Press again to deactivate this function. The
full on function takes priority of Stnaby if both are active.

MANUAL FIXTURES

In addition to 48 shows, this console also allows you to control the fixtures manually. Up
to 16 patched fixtures are readily on call, giving you a great flexibility to get to desired
effects whether the fixtures are being used by the shows or not.
When th Fixture LED is lit and the message "Select fixture" appears in the upper-right
LCD Screen, press the Fixture 1-16 button to select what you want to control manually.
The LED above the Fixture 1-16 will blink briefly and the message of channel effects
patched for the fixture will appear in the upper right LCD Screen.
Move the faders 1-6 to manually control the effects displayed in the screen. Meanwhile
the joystick can be used to control the X (Pan) or Y (Tilt) movements if the Pan and Tilt is
active (indicated by the li LEDs). Press the OK button to scrool to the next page if there
is more than on page. The fader 1-6 buttons can be used to call the tabulating values if
you've set up the tabulations during the setup of menu 1.1.9 Control Type.
In the fixture is being used by ashow, the rest channels not having handled by the
manual control will still be subject to the show. If you want to call off the manual channel
to restore the show over the manually-affected channels, you can press eighter of the
SETUP and RECORD buttons.
Group of fixtures is useful if there are several equivalent fixtures, which you want to
control at a time, in the patch. Press and hold the FIXTURE button, the message of 6
73