Update Software - PROEL PLBR256MH2 - REV 07-2006 Manual

Press OK or ESC to return to earlier menu. If there is something wrong, an error
message will appear in the LCD. Check your connectors and try again.

9. UPDATE SOFTWARE

Press [SETUP] and move fader 4 or press [▲] / [▼] buttons until the message UPDATE
SOFTWARE appears in the screen.
Press OK to access settin menu. The following windows will appear indicating that the
console is ready to receive the spftware.
Turn to your PC and call the version of Hyper Terminal that you have created for
PLBR256MH2. Click on Transfer on the top of menu bar and select Send Text File. Find
the drive and folder where the text file (supplied by PROEL) is located and open it. Hyper
Terminal will begin to trasmit the file. It will take 2 minutes to complete this software
updating. If the software has been update successfully, your PLBR256MH2 will reboot its
system and get started with its procedures. If there is something wrong, an error
message will appear. Check the connection and try again.
64