PROEL PLBR256MH2 - REV 07-2006 Manual page 51

1.1.5 Hard / Soft Cross
When the LCD screen shows the message CREATE NEW FIXTURE, press OK then
move the fader 5 or press [▲] / [▼], until HARD / SOFT CROSS appears in the screen.
Press OK, the effect strings previously created in menu 1.1.2 LCD EFFECT LABEL will
reappear. This function allows you to determine how a fixture channel will obtain its
desired setting. This may be HARD, i.e. taking place with no fadetime, or SOFT, i.e.
taking place with fadetime. Respectively move faders 1-6 to select HARD or SOFT for
the function effects in the screen directly above these faders 1-6. Also you can press [◄]
/ [►] to pass from effect to effect, then use [▲] / [▼] to select HARD or SOFT for the
underlined effect. Press OK to go on if there are more than one page. Once you have
finished al setting, press ESC to return to the earlier menu.
The storage is automatic.
1.1.6 Fixture Name
When the LCD screen shows the message CREATE NEW FIXTURE, press OK then
move the fader 5 or press [▲] / [▼], until FIXTURE NAME appears in the screen.
Press OK and a new windows will ask you to enter or modify the name of the fixture.
Press [◄] / [►] to move the underline to desires position, then move fader 4 or press
[▲] / [▼] to select the character for the underline position. Once you've finished to
change the fixture's name, press ok to confirm it and return to the earlier menu. If you
want to give up, just press ESC to return to the earlier menu.
51