Record Scenes - PROEL PLBR256MH2 - REV 07-2006 Manual

3. RECORD SCENES

This console alloes you to record up 48 scenes of conventional lights. Press RECORD
button and relative LED will blink briefly. Select the show, chase or scene you want to
record.
Press SCENE button to access edit scene menu. Its LED will be lit and a new window
will appear indicating you to select the scene you wish to edit.
Select the scene number using Flash 1-12 buttons together with the PAGE button to
access pages 13-24, pages 25-36 and pages 37-48.
This menu allows you to create or modify a scene consisting of up to 24 channeles and
set the fade time (TIME) for the scene. Use the channels faders 1-12 together with the
CHANNEL BANK button to create a desired lighting setup, then press the STORE button
to save it permanently as a scene.
On the other hand, move the fader 2 or press [▲] / [▼] to select the fade-time within 0 to
1 min and 39.9 sec. Press OK to save your new faderime and return to the earlier menu,
then you can start editing another scene or more. Press ESC to leave this menu without
changing the fade time of the scene. Proceed in this way until all 48 scenes have been
finished.
Press the RECORD or SCENE button to leave the Record Scene menu (Scene LED will
turn off).
71