PROEL PLBR256MH2 - REV 07-2006 Manual page 54

As described in the above paragraph, TAB allows you to use [▲] / [▼] to jump to certain
condition in accordance with the preset tabset. To establish a tabset, please follow the
below procedures:
a. Press the function button directly below the function efffect in the LCD Screen, a new
window will appear:
Where TOT.Pset is amount of tabulation values, Pset is the ordinal number of tabulation
values and VALUE is the assignation.
b. Move the Fader 3 to determinate how many taulation values you wish to use. This
value ranger from 1-50. Once the amount of tabulation values is decided, move the
fader 5 to select the number for Pset and the Fader 6 to select the value within 0-255
for VALUE.
c. Repeat moving fader 5 and fader 6 until all tabulation values have been assigned.
Once you have finished the whole tabulation, press OK to confirm it and return to the
earlier menu. If you want to give up, just press ESC to return to the earlier menu.
Press OK to go on with your setup with control type if there is more than one page.
Finished your settings, press ESC to return to the earlier menu. The storage is
automatic.
54