1.1.2 LCD Effect Label
When the LCD Screen shows the message CREATE NEW FIXTURE, press OK then
move the fader 5 or press [▲] UP / [▼] DOWN button until LCD EFFECT LABEL
apeears in the screen.
Press OK and a new window will ask you to enter a value within 1-5 for the amount of
pages required to view all lighting effects on the screen. Move the fader 5 or the [▲] /
[▼] buttons to select the value and press OK to confirm or ESC to exit. Press OK and a
new window will ask you to enter a string of effects (a definition list of the commands
required by the fixture to be written on the screen for each page). Each page contains 6
strings of effects and each string consists of a maximum of 6 characters. Press [▲] / [▼]
buttons to recall in string effects from built-in. If you need some special effects, you'll
have to make a new one yourself. Press [◄] / [►] buttons to pass from letter to letter,
the move fader 1 to enter the character one by one.
st
nd
Once you've completed the effects label of the 1
page, press OK to go on with the 2
page.
Had you finished all effects label, please press ESC to return to the earlier menu. The
storage is automatic.
48