Fixture Patch - PROEL PLBR256MH2 - REV 07-2006 Manual

faders: 1-12 / 13-24), DMX address from 504 to 511 will allocated to 4 strobes and al last
the DMX address no. 512 will be left for the fog machine.
When OFF is selcted (Manual oatch is active), you can allocate DMX addresses at your
discretion)
Once you have changed the patch mode, press OK to confirm. If you are sure, press OK
to confirm your selection and access the setting menu. Press ESC to quit. NO will abort
this setting and return to the earlier menu.
Press OK to access the setting menu and selct the unti type you want to patch. Wheter
you are in automatic or manual patch mode, there are 4 unit types called Fixture,
Parcan; Strofe and Fog Machine. Move fader 5 or press [▲] / [▼] until desired unit
appears in the screen.

2.1 Fixture Patch:

Use the Cursor UP/DOWN buttons or F5 fader to scroll to [FIXTURE PATCH].
Press OK to access the setting menu. This alloew you to establish a patch of up 16
fixtures. Move the fader 1 to select fixture number within 1-16, then move the fader 2 to
select your desired fixture from library for the selected number. Repeat this setup until
you've completed this patch. Also you can use [◄] / [►] to pass from fixture number to
type, the press [▲] / [▼] to select the number or type.
When you are in automatic patch mode, all patched fixtures will be automatically
addressed within 1-479. When you are in Manul patch mode, please calculate the DMX
channels carefully so tht you can establish a proper patch. To remove a fixture from this
patch, you just have to press the function button below the fader 5. When you have
finished this patch, you can press OK or ESC to return to the earlier menu. The storage
is automatic.
58