Record; Record Shows; Active Effects - PROEL PLBR256MH2 - REV 07-2006 Manual

RECORD

This section describe the procedure for creating scenes, chases and shows. You will
learn how to start the recording, how to create or save a show for selected fixtures or
effects, how to create chase and edit steps, etc.

1. RECORD SHOWS

To start recording, simply click the Record button, its LED will blink briefly, and a new
window will ask you to select what you want to record.
Press [SHOW] button to access the edit menu. Its LED will be lit and a new window will
appear indicating you to select the showyou wish to edit.
Select the show number using Flash 1-12 togheter with the Flash Page button, a new
window will appear.
Move fader 2 or press [▲] / [▼] to select the number of the step within 1-48. Press OK
(EDIT) to access settino menu. This menu has 3 options named Active Effects, Edit
Steps and Step's Time. The following paragraphs will detail these options respectively.

1.1 Active Effects:

Move the fader 4 or press [▲] / [▼] buttons until the message ACTIVE EFFECTS
appears in the screen. Press OK to access this setting menu. This menu allows you to
determine which fixture is used by the show, which channel (effect) is actice and which
one is not.
67