Load Data File - PROEL PLBR256MH2 - REV 07-2006 Manual

Don't discontinue the communication while you are sending the file. When the
trasmission is over, a complete message will appear in the screen. Press OK oe ESC to
return to the earlier menu.

8. LOAD DATA FILE

Press the Setup button to access setup menu. Move fader 4 ore press [▲] / [▼]until
LOAD DATA FILE appears in the screen. Press OK to access setting menu, a new
window will appear indicating you to select desired data file you want to download from
your PC. This function allow you to download the new library, memoty or setup from your
PC to overwrite old library, memory or setup stored in your console. Before you can start
downloading the data file, please make sure you've established the communication
between this console and tour PC successfully and Windows configuration has been
completesd properly.
Please refer to menu 7 on page for instructions of RS-232 connection and Windows
configuration.
Call the version of Hyper Terminal that you previously created for PLBR256MH2. Click
on TRANSFER on the rop menu bar and select Send Text File. Adialog box will appear
allowing you to select the text file. Find the drive and folder, select the file and click on
OPEN. Hyper Terminal will begin to trasmit the file. When the downloading is over, a
receiving prompt message will appear in the screen.
63