Parcan Patch; Strobe Patch - PROEL PLBR256MH2 - REV 07-2006 Manual

2.2 Parcan Patch:

Use the Cursor UP/DOWN buttons or F5 fader to scroll to PAR PATCH.
Press OK to access the setting menu. This menu allows you to address 24 PAR-lights
consecutively.
When you are in Automatic patch mode, DMX addresses 480-503, i.e. 12 channel faders
1-12 / 13-24 will be automatically addressed to the PAR-light. When you are in Manual
patch mode, please calculate the DMX channel carefully to address properly.
Move fader 2 or press [▲] / [▼] to select the starting DMX address, 24 consecutive
addresses will be automatically give. Press OK to confirm your setting, eighter you can
press ESC to give up and return to the earlier menu.

2.3 Strobe Patch:

Use the Cursor UP/DOWN buttons or F5 fader to scroll to STROBE PATCH.
Press OK to access the setting menu that allows you to address 4 strobes with 2 channel
each. When you are in automatic patch mode, DMX addresses 504-511 will be
automatically addressed to the strobes. When you are in Manual patch mode, be sure to
properly calculate the DMX channels to addressing. Move fader 2 or press [▲] / [▼] to
select the starting DMX address, 4 strobes will be automatically addressed. Press OK to
confirm your setting, eighter you can press ESC to give up and return to the earlier
menu.
59