Edit Existing Fixture - PROEL PLBR256MH2 - REV 07-2006 Manual

1.1.10 Dimmer Patch
When the LCD screen shows the message CREATE NEW FIXTURE press OK then
move the fader 5 or press [▲] / [▼] until DIMMER PATCH appears in the screen.
Press OK and a message will appear in the screen warning you that the Dimmer channel
channel shold not be identical to the Pan, Tilt and Reset/Lamp channels. Press OK again
and a new window will appear indicating you to assign the dimmer channel.
Move fader 5 to select a value for the dimmer channel according your fixture profile.
Pnce you have finished your settings, press OK to confirm it and return to the earlier
menu. If you want to give up, just press ESC to the earlier menu.

1.2 Edit Existing Fixture:

Press [SETUP] to access Setup menu. Move fader 4 or press [▲] / [▼] until the
message INTERNAL LIBRARY appears in the screen.
Press OK and move fader 5 or press [▲] / [▼] until message EDIT EXISTING FIXTURE
appears in the screen. Press OK and a new window will indicate you to select the fixture
you want to edit.
This menu allows you to modify the sttributes of fiktures already in the library.
Move fader 4 [▲] / [▼] buttons to select desired fixture from library. Once the fixture is
selected, press OK and a new window will appear indicating that you can start to modify
the attributes of this fixture.
Please refer to menu 1.1 and its submenus for instructions of configuration of fixture.
55