Delete Fixture - PROEL PLBR256MH2 - REV 07-2006 Manual

1.3 Delete Fixture:

Press [SETUP] to access Setup menu. Move fader 4 or press [▲] / [▼] until the
message INTERNAL LIBRARY appears in the screen.
Press OK and a new window will appear. Move fader 5 or press [▲] / [▼] until the
message DELETE FIXTURE appears in the screen. Press OK and a new window will
appear indicating you to select the fixture you want to delete. This menu allows you to
delete unwanted fixtures from library.
Move fader 4 or [▲] / [▼] buttons to select desired fixture. Once the fixture is selected,
press OK to delete the relative fixture. The fixture will be deleted from the library
successfully when it returns to the earlier menu. If the fixture is currently used in the
Patch, you're not allowed to delete this fixture. Press ESC to abandon or press F6 sited
below NO in the screen to leave this menu without deleting this fixture.
ERROR MESSAGES
If any mistakes are made or any steps are omitted during the new fixture creation, the
following prompt will appear on the screen:
56