PROEL PLBR256MH2 - REV 07-2006 Manual page 53

1.1.9 Control Type
When the LCD screen shows the message CREATE NEW FIXTURE, press OK then
move the fader 5 or press [▲] / [▼], until CONTROL TYPE appears in the screen.
Press OK and the effects strings previously created in menu 1.1.2 LCD Effect Label will
reappear. This function allows you to select the control type for lighting effects. Many
fixtures in fact, have the possibility to rotate continuously the color and gobo wheels,
which enables operators to obtain interesting projection effects. However, it is more
important to be able to directly jump to a certain color or effect during programming. The
types of control avaible are Linear (LIN) ad Tabset (TAB): the first allows you to use the
programmed fader to adjust the fixture chennel proportionally, the second allows you to
use [▲] / [▼] to quickly change the condition in accordance with the preset tabset.
Move the respective faders 1-6 to select LIN or TAB for the function effects in the screen
directly above these faders 1-6. Also you can press [◄] / [►] to pass from effect to
effect, then use [▲] / [▼] to select LIN or TAB for the effect.
ì
53