Strobe Type; Gooseneck Dimmer; View Free Memory - PROEL PLBR256MH2 - REV 07-2006 Manual

4. STROBE TYPE

Press [SETUP] and move fader 4 or press [▲] / [▼] buttons until the message STROBE
TYPE appears in the screen. Press OK to access setting menu. This function allows you
to select the following strobes: SPQ-2, Energy DMX e SP-1500/SP-750/SP-200H that
you can control by this console. Move fader 4 or press [▲] / [▼] to select desired strobe
type. Press OK to confirm your setting or you can press ESC to give up and return to the
earlier menu.
Warning! To have your strobes adaptes to this condole, you may have to do some extra
setup on your strobe. As the SPQ-2, make sure that you switch dip-switch 1 & 2 on and
the rests off.

5. GOOSENECK DIMMER

Press [SETUP] and move fader 4 or press [▲] / [▼] buttons until the message
GOOSENECK DIMMER appears in the screen. Press OK to access setting menu and
adjust the light intensity for DJ work light (sold separately). Move Fader 4 or press [▲] /
[▼] to select a value within 0-16. 0 will give zero intensity and 16 will give full intensity.
Press OK to confirm your setting or you can press ESC to gice up and return to the
earlier menu.

6. VIEW FREE MEMORY

Press [SETUP] and move fader 4 or press [▲] / [▼] buttons until the message VIEW
FREE MEMORY appears in the screen.Press OK and a new window will tll you how
many data files there are and how much memory space is available for the fixture
library.Press OK or ESC to return to the earlier menu.
61