Load From Card - PROEL PLBR256MH2 - REV 07-2006 Manual

11. LOAD FROM CARD

Press [SETUP] button to access Setup menu and move fader 4 or press [▲] / [▼]
buttons until the message LOAD FROM CARD appears in the screen. Press OK to read
this CF card. Move fader 3 to select the sector within 1-15.Press OK to access setting
menu, a new window will appear allowing you to select the library, memory or setup to
restore your console. Move fader 3 or press [▲] / [▼] to select the licrary, memory or
setup. Press OK to start reading this CF card.
The old file will be overwritten by the new file from the CF card when you have
successfully read in this CF card.
If the CF card is not inserted or improperly inserted, the message no card will appear in
the screen.
The CF card that you use to load the library, memory or setup, should be written by this
console before. Otherwise, you wont,t read in this CF card successfully, accordingly
causing data read error.
Press OK or ESC to return to the earlier menu when you have successfully read in the
CF card.
66