Patch - PROEL PLBR256MH2 - REV 07-2006 Manual

If you have changed the sttributes of an existing fixture, when you leave this menu the
following message appear:
Press OK to confirm your modifications, ESC to cancel your modification and retry or NO
to abort this setup without modifyng the attributes of the fixture and return to the earlier
menu.
The library can contain a maximum of 256 fixtures. Whrn there are 256 fixture in the
library and you try to add a new one, a reminder meassage eill appear:
If you want to delete the fixture that has been patched, a reminder message will appear.
When there is no fixture in the library and you try to delete a fixture, a rimender message
will appear.

2. PATCH

Press [SETUP] to access Setup menu. Move fader 4 or press [▲] / [▼] until the
message PATCH appears in the screen.
Press OK and select ON or OFF for DMX CHANNEL AUTO PATCH. This menu allows
you to select automatic or manual patching. Move fader 5 or press [▲] / [▼] to select ON
or OFF. When ON is selected (automatic patch is active), the channels included within 1
and 479 are automatically assigned to 16 fixtures (moving heads or scanners), the DMX
addresses from 480 to 503 will be assigned to the dimmer to control PAR lights (12
57