Internal Library; Create New Fixture - PROEL PLBR256MH2 - REV 07-2006 Manual

1. INTERNAL LIBRARY

Press the [SETUP] button to access setup menu. Move the faser 4 or press the UP [▲]
or DOWN [▼] buttons until Screen shows[ Internal Library ] in the bottom line.
Press [OK] to access setting menu which consist of three(3) items, including CREATE
NEW FIXTURE, EDIT EXISTING FIXTURE and DELETE FIXTURE.

1.1 Create New Fixture:

In Internal Library menu, use Cursor UP[▲] / DOWN [▼] buttons or F5 fader to scroll to
[CREATE NEW FIXTURE ].
Press OK to start to establish the configuration for the newly-added fixture. This menu
allows you to add a fixture and its attributes into the fixture library (The library can hold a
maximum of 255 types of fixtures). There are ten (10) options in CREATE NEW
FIXTURE:
TOTAL DMX CHANNEL – LCD EFFECT LABEL – INTERNAL PATCH –
PAN/TILT PATCH – HARD/SOFT CROSS – FIXTURE NAME – RESET/LAMP VALUES
– DIP-SWITCH CONFIGURATION – CONTROL TYPE – DIMMER PATCH.
1.1.1 Total DMX Channel
When the LCD Screen shows the message press OK then
CREATE NEW FIXTURE
move the fader 5 or press [▲] UP / [▼] DOWN, buttons until [ TOTAL
DMX CHANNEL] appears in the Screen.
After pressing OK, in a new window you must define the number of the channels that are
used by your new fixture.
Move the fader 5 or cursors [▲] UP / [▼] DOWN to select a value within 1-36, then
press OK to confirm your setting and return to the earlier menu.
47