Configuring The E-Mail Alert - Brocade Communications Systems 8 Administrator's Manual

6. Click Apply.

Configuring the e-mail alert

You can set a different e-mail alert configuration for each class. For example, you can set one
e-mail notification for SFPs and another for E_Ports. Before configuring e-mail alert recipients, you
must set up the e-mail notification recipient's DNS server and domain name.
NOTE
You must execute the fwalfilterset 1 command in CLI to enable e-mail notification.
Use the following procedure to configure an e-mail alert recipient.
1. Open the Fabric Watch window.
2. Select the Email Configuration tab.
3. Click Enable or Disable to enable or disable the e-mail alert status.
4. Enter the e-mail address of the recipient in the Recipient Email Address text box. Messages are
5. Click Apply.
6. Optional: Click Send Test Email to receive a test e-mail so you can verify the e-mail notification
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
NOTE
When you disable e-mail alerts, Fabric Watch does not send e-mail notification, even if the
e-mail notification method is assigned to monitored areas.
sent to this address when e-mail notification is enabled.
NOTE
E-mail addresses must not exceed 128 characters.
is working correctly. You can send a test e-mail only after you have applied your settings.
13
E-mail notification
179