Configuring Cup Logical Paths; Link Incident Registered Recipient Configuration; Viewing Link Incident Registered Recipient Configurations; Configuring Lirrs - Brocade Communications Systems 8 Administrator's Manual
Supporting fabric os v6.4.0
Hide thumbs
Also See for 8:
- Command reference manual (1080 pages) ,
- Reference (842 pages) ,
- Reference manual (382 pages)
Table of Contents
Advertisement
18
Link Incident Registered Recipient configuration
Configuring CUP logical paths
Use the following procedure to configure a CUP logical path.
1. Select a FICON-enabled switch from the Fabric Tree.
2. Select Tasks > Manage > Switch Admin.
3. Click Show Advanced Mode to see all the available tabs and options.
4. Select the FICON CUP tab.
5. Click the CUP Logical paths subtab.
6. Select a logical path and click Set Current.
Link Incident Registered Recipient configuration
The Link Incident Registered Recipient (LIRR) receives Link Incident Reports (RLIR) on the source
N_Port. The LIRR database is stored on the switch.
Viewing Link Incident Registered Recipient configurations
Use the following procedure to display a list of Link Incident Registered Recipient (LIRR)
configurations.
1. Select a FICON-enabled switch from the Fabric Tree.
2. Select Tasks > Manage > Switch Admin.
3. Click Show Advanced Mode to see all the available tabs and options.
4. Select the FICON CUP tab.
5. Click the Link Incident Registered Recipient subtab.
Configuring LIRRs
Use the following procedure to configure the Link Incident Registered Recipients (LIRR).
1. Select a FICON-enabled switch from the Fabric Tree.
2. Select Tasks > Manage > Switch Admin.
3. Click Show Advanced Mode to see all the available tabs and options.
4. Select the FICON CUP tab.
5. Click the Link Incident Registered Recipient subtab.
252
DRAFT: BROCADE CONFIDENTIAL
The FICON CUP page displays the FICON Management Server page in front. All attributes on
this page are read-only until FMS mode is enabled.
The FICON CUP page displays the FICON Management Server page in front. All attributes on
this page are read-only until FMS mode is enabled.
The FICON CUP page displays the FICON Management Server page in front. All attributes on
this page are read-only until FMS mode is enabled.
Web Tools Administrator's Guide
53-1001772-01
Advertisement
Table of Contents
Troubleshooting
