Tunnel And Tcp Performance Monitoring Graphs - Brocade Communications Systems 8 Administrator's Manual

1. Open the Performance Monitoring window.
2. Select Performance Graphs > Advanced Monitoring > SCSI Commands > Graph Type.
3. Navigate to a switch > slot > port in the Port Selection List.
4. Click the port from the Port Selection List and drag it into the Enter/drag port field.
5. Optional: For the LUN per port graphs, enter a LUN number, in hexadecimal notation.
6. Click OK.

Tunnel and TCP performance monitoring graphs

This section describes how to generate the Tunnel and TCP performance monitor graphs. You can
launch maximum of four Tunnel and TCP graphs for a switch at a time. A total of 16 TCP connection
graphs can be launched for a switch.
The TCP graphs available are:
•
•
•
•
•
•
•
•
The Tunnel graphs available are:
•
•
•
For TCP connection graphs, tool tip is displayed only for all selected connections.
Use the following procedure to create a Tunnel and TCP graph.
1. Select Monitor > Performance Monitoring.
2. Select Performance Graphs > Tunnel and TCP Graph.
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
The applicable setup dialog box displays.
For the Brocade Encryption Switch, you can enter up to eight LUN masks
For the Brocade 5100, 5300, 300, 7500, 7800, and 8000, you can enter up to eight LUN
masks
For the Brocade 4100 or 5000 Switch, you can enter up to eight LUN masks.
For the Brocade 48000 director, you can enter up to four LUN masks.
For all other switches running Fabric OS 4.x or v5.x, you can enter up to two LUN masks.
For switches running Fabric OS 3.x, you can enter up to three LUN masks.
The selected graph displays in the canvas.
Sender RoundTrip
Sender RoundTripVariance
TCP DupAck
TCP OOS
TCP SlowStart
TCP FastRetransmit
TCP Tx(MB/sec)
TCP Rx(MB/sec)
Throughput(MB/sec)
Effective Throughput(MB/sec)
CompressionRatio
The Performance Monitoring window displays.

Tunnel and TCP performance monitoring graphs

8
113