Brocade Communications Systems 8 Administrator's Manual page 242

17
User-defined accounts
3. Select the account to modify.
4. Click Change Password.
5. Enter the current password of the account.
6. Enter the new password of the account.
7.
8. Click OK.
9. Click Apply to save your changes.
Setting the rules for passwords
Use the following procedure to set rules for passwords.
1. Open the Switch Administration window as described in
2. Select the User tab.
3. Click Set Password Rule.
4. Fill out the dialog box for the password rules you want to enforce.
5. Select whether to enable or disable the lockout administration features.
6. Click OK to close the dialog box.
7.
214
DRAFT: BROCADE CONFIDENTIAL
If you are logged in as a switchadmin, you can only change the password of your own account.
The Set User Account Password dialog box displays.
This step is required only if you are changing the password of your own or a peer admin
account.
The new password must have at least one character different from the old password.
Retype the new password in the Confirm Password field.
window" on page 35.
The Configure Password Rule dialog box displays.
The available options are:
•
Minimum number of days (0–999) before you can change the password again
•
Number of days (0–999) before a password expires
•
Number of password changes before you can reuse a password
•
Minimum password length (8–40 characters)
•
Minimum number of uppercase and lowercase characters required
•
Minimum number of digits and punctuation characters required
•
Number of characters that can be repeated in the password
•
Number of failed login attempts (0–999) before the password is locked from further
change attempts, and the amount of time the password is locked (0–99999 minutes)
•
Number of days to warn user before password expiration (0–999)
If you select to disable the lockout administration, the user is never locked out of the system.
Click Apply to save your changes.
"Opening the Switch Administration
Web Tools Administrator's Guide
53-1001772-01