Using the Access Gateway
In this chapter
Access Gateway overview
Access Gateway is a software feature that allows multiple host bus adapters (HBAs) to access the
fabric using fewer physical ports. You can set a switch in Access Gateway mode to transform them
into a device management tool that is compatible with different types of fabrics, including Brocade
Enterprise OS (EOS), and Cisco-based fabrics.
When a switch is in Access Gateway mode, it is logically transparent to the host and the fabric.
Brocade Access Gateway mode allows hosts to access the fabric without increasing the number of
switches and simplifies configuration and management in a large fabric by reducing the number of
domain IDs and ports.
Access Gateway mode is available on the following Brocade switches:
•
•
•
•
•
•
•
•
•
•
For detailed descriptions of the Access Gateway, refer to the Brocade Access Gateway
Administrator's Guide.
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
•
•
•
Access Gateway mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
•
•
•
•
Port configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
•
•
5100
5410
5424
5450
5460
5470
5480
8000
300,
Brocade Encryption Switch
Chapter
12
159