Ending A Web Tools Session; Web Tools System Logs - Brocade Communications Systems 8 Administrator's Manual

Web Tools does not display a warning when the session is about to time out. If your session ends
due to inactivity, all Web Tools windows become invalid and you must restart Web Tools and log in
again.
Web Tools enables sessions to both secure and nonsecure switches.
Access rights for your session are determined by your role-based access rights and by the contents
of your selected Admin Domain. After you log in, you can change to a different Admin Domain at any
time. However, you cannot change your role-based permissions.

Ending a Web Tools session

To end a Web Tools session, perform one of the following actions:
•
•
•
NOTE
If you click Logout in the Switch Explorer window, and Web Tools leaves the Temperature, Fan, Power,
and the Switch status windows open, you must manually close them.

Web Tools system logs

Web Tools uses the log4j framework to write the logs into a file
When you launch Web Tools for the first time, it automatically creates the following directories.
These directories are created under Web Tools directory if they are not available:
•
•
The Web Tools Switch Support Save directory contains the following files:
•
•
•
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
Click Logout in the Switch Explorer window.
Click the X in the upper-right corner of the Switch Explorer window to close it.
Close all open Web Tools windows.
A <Web Tools> directory under the user home directory.
The Web Tools Switch Support Save directory with the name format <Core Switch Name-Switch
IP Address-Switch WWN>.
Log4j.xml
WebTools.log
SwitchInfo.txt

Web Tools system logs

1
15