Synchronizing Services On The Cp; Figure 18 High Availability Window, Cp Tab - Brocade Communications Systems 8 Administrator's Manual

3
High Availability overview
The High Availability window contains the following two tabs:
•
•
The High Availability window gets refreshed automatically. You can also click Refresh to update the
information displayed in the High Availability window.
Admin Domain considerations
To open the High Availability window, the switch must be a member of your current Admin Domain.
If the switch is not a member of the current Admin Domain, the Synchronized Services and Initiate
Failover buttons are unavailable.

Synchronizing services on the CP

A nondisruptive CP failover is only possible when all the services are synchronized between both
CPs.
Use the following procedure to synchronize services on the CP.
52
DRAFT: BROCADE CONFIDENTIAL
FIGURE 18
High Availability window, CP tab
The Service tab displays information about the switch. When the hardware is configured as a
dual switch, the Service tab displays information about both switches.
The CP tab displays information about slots. For Brocade 48000 and Brocade DCX-4S, CP
blades are placed in slot 5 and slot 6, and for Brocade DCX, CP blades are placed in slot 6 and
7.
Web Tools Administrator's Guide
53-1001772-01