Media Problems; Problems With Image Size And Position - Kyocera FS-5800C User Manual

Hide thumbs Also See for FS-5800C:
Table of Contents

Advertisement

Media problems

Trouble
Frequent paper-picking
errors
Frequent media jams

Problems with image size and position

Trouble
Off-set images
Cut-off images
Care and Maintenance
Possible Cause
Fan the paper or transparencies before installing them in
their respective cassettes; this is especially important for
transparencies because they tend to stick together.
Make sure that you have loaded paper in the paper tray and
transparencies in the transparency cassette.
Make sure that the media is installed under the hooks at the
front of the media cassette.
If printing on transparencies and your printer has an option
Paper Feeder, make sure that the transparency cassette is
installed in the upper or middle tray slot.
Clean the paper-pick rollers (
Make sure that you use a high-quality laser paper:
60-105 g/m
2
(16-28 lbs.) paper in the media cassettes and
2
75-165 g/m
(20-44 lbs.) paper in the multi-purpose tray.
If you are using media that is 105 g/m
Face Down media output setting is selected in the driver. If
it is, change the setting to Face Up.
Use only recommended transparencies (
cannot guarantee the results of using other transparencies.
Make sure that the media is installed under the hooks at the
front of the media cassette.
Do not overfill the media cassette, as indicated by the red
line on the right side of the cassette.
Clean the paper-pick rollers (
Make sure that the media thickness switch is set correctly
for the installed media (
Possible Cause
Check your application for correct image sizing.
Check your application for image sizing.
Make sure that the correct size media is in the media cassette.
P. 69).
2
(28 lbs.), check if the
P. 114). We
P. 69).
P. 19).
93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents