Leds; Table 1-2 Leds On The Front Panel Of The H3C Secpath F1000-S Firewall - H3C SECPATH F1000-S,SECPATH F1000-S HOST Installation Manual

Installation Manual
H3C SecPath F1000-S Firewall
DDR SDRAM
Flash memory
Physical dimensions
(H × W × D)
Input
power
Max power
consumption
Operating temperature
Operating humidity
(noncondensing)
Note:
Synchronous dynamic random access memory (DSRAM) stores the communication
data with the CPU and running system.
Flash memory stores application files, exceptional information and configuration files.
Boot read only memory (Boot ROM) stores the bootstrap program files.

1.2.3 LEDs

Table 1-2 describes the LEDs on the front panel of the H3C SecPath F1000-S firewall
and describes how to read their state.

Table 1-2 LEDs on the front panel of the H3C SecPath F1000-S firewall

LED
PWR0
PWR1
Item
Default: 512 MB
Max: 1 GB
Default: 16 MB
Max: 32 MB
44 × 436 × 430 mm (1.7 × 17.2 × 16.9 in.), excluding the
rubber feet
Rated voltage range: 100 VAC to 240 VAC, 50 Hz or 60
Hz
AC+AC
Max voltage range: 90 VAC to 264 VAC, 50 Hz or 60 Hz
Rated current: 1.5 A
100 W
0°C to 40°C (32°F to 104°F )
10% to 90%
Power supply unit (PSU) LED:
OFF means the PWR0 is not supplying power to the device; ON
means the PWR0 is supplying power to the device.
PSU LED:
OFF means the PWR1 is not supplying power to the device; ON
means the PWR1 is supplying power to the device.
Description
Description
1-3
Chapter 1 Product Overview