Figure 5-2 Sending File Interface - H3C SECPATH F1000-S,SECPATH F1000-S HOST Installation Manual

Installation Manual
H3C SecPath F1000-S Firewall
Step 5: Click <Browse>. Select the application file to be downloaded and set protocol to
XModem. Click <Send>. The following dialog box pops up:

Figure 5-2 Sending File interface

Step 6: After completing the downloading, the system begins writing data to the Flash,
and then displays the following message in the terminal window, indicating the
completion of the downloading:
XModem download completed, Packet length 8790321 bytes.
System file length 7868992 bytes, http.zip file length 921329 bytes.
Writing file flash:/system to FLASH...
Please wait, it may take a long time
################################################
Writing into Flash Succeeds.
Writing file flash:/http.zip to FLASH...
Please wait, it may take a long time
##########################################################################
######
#########
Writing into Flash Succeeds.
Please use 9600 bps.Press <ENTER> key to reboot the system.
Restore the speed of the console terminal to 9600 bps as prompted, disconnect and
reconnect the terminal. The system starts up normally.
II. Upgrading the Boot ROM program
Step 1: Enter the Boot menu and select 7 to enter the Boot ROM operation menu.
Chapter 5 Software Maintenance
5-4