Appendix B Leds - H3C SecPath F100-C-A-W Installation Manual

Appendix B LEDs

Table1-19 LED description for the F100-C-A3-W/F100-C-A5-W firewall
LED
System status LED
Power status LED
10/100/1000BASE-T
copper port LED
Table1-20 LED description for the F100-C-A6-WL firewall
LED
System status LED
Power status LED
4G module LED
10/100/1000BASE-T
copper port LED
Table1-21 LED description for the WLAN module (SIC-AP320)
LED
WLAN module status
LED
Mark Status
Off
SYS
Slow flashing green
Fast flashing green
Off
PWR
Steady green
Off
10/100/1000BA
Steady green
SE-T
Flashing green
Mark Status
Off
SYS
Slow flashing green
Fast flashing green
Off
PWR
Steady green
Off
Flashing green (1 Hz)
LTE
Flashing green (0.3 Hz)
Flashing green (2.5 Hz)
Off
10/100/1000B
Steady green
ASE-T
Flashing green
Mark Status
Steady amber
SYS Flashing green
Flashing amber
33
Description
The firewall is not powered on or has
failed.
The firewall is operating correctly.
The firewall is loading software.
The power system is faulty.
The power system is operating
correctly.
No link is present.
A link is present.
The port is receiving and sending data.
Description
The firewall is not powered on or has
failed.
The firewall is operating correctly.
The firewall is loading software.
The power system is faulty.
The power system is operating
correctly.
The 4G module is faulty or in airplane
mode.
The 4G module is searching for a
network.
The 4G module has connected to a
network.
The 4G module is transmitting data.
No link is present.
A link is present.
The port is receiving and sending data.
Description
The firewall is starting up.
The 2.4 GHz radio has client access.
The 5 GHz radio has client access.