Table 1-5 Attributes Of The Ge Electrical Interfaces; Table 1-6 Attributes Of The Ge Optical Interfaces - H3C SECPATH F1000-S,SECPATH F1000-S HOST Installation Manual

Installation Manual
H3C SecPath F1000-S Firewall
III. Gigabit Ethernet (GE) Interface
The H3C SecPath F1000-S firewall provides four fixed 10/100/1000 Mbps
auto-sensing interfaces (with two electrical interfaces and two applicable to both optical
and electrical modes). The electrical interface uses the RJ-45 connector and the optical
interface uses the small form-factor pluggable (SFP) connector.
Five 1000Base-FX SFP optical transceiver options are available for the H3C SecPath
F1000-S firewall:
Multimode short-haul (850 nm)
Single mode medium-haul (1310 nm)
Single mode long-haul (1310 nm)
Single mode long-haul (1550 nm)
Single mode ultra-long haul (1550 nm)
They all provide LC interfaces and are hot swappable.
Table 1-5 shows the Ethernet interface attributes of the H3C SecPath F1000-S firewall.

Table 1-5 Attributes of the GE electrical interfaces

Attribute
Connector
Interface type
Frame format
Operating mode

Table 1-6 Attributes of the GE optical interfaces

Attribute
Connector
Optical fiber
RJ-45
auto-MDI/MDIX
Ethernet_II
Ethernet_SNAP
10/100/1000 Mbps auto-sensing
Full/half duplex
(1000 Mbps and half duplex cannot be used at the same time)
Multimo Single
de mode
short-ha medium-ha
ul (850 ul (1310
nm) nm)
SFP/LC
62.5/125
9/125 μm
μm
single mode
multimod
fiber
e fiber
1-5
Chapter 1 Product Overview
Description
Description
Long-haul Long-haul
(1310 nm) (1550 nm)
9/125 μm 9/125 μm
single single
mode fiber mode fiber
Ultra-long
haul (1550
nm)
9/125 μm
single
mode fiber