Leds; Table 1-2 Leds On The Front Panel Of The H3C Secpath F1000-A - H3C SECPATH F1000-A,SECPATH F1000-A HOST Installation Manual

Installation Manual
H3C SecPath F1000-A Firewall
Physical dimensions
(H × W × D)
Input
power
Max power
consumption
Operating temperature
Operating humidity
(non-condensing)
Note:
Double data rate synchronous dynamic random access memory (DDR DSRAM) stores
the communication data with the CPU and running system.
Flash memory stores application files, exceptional information and configuration files.
Boot read only memory (Boot ROM) stores the bootstrap program files.

1.2.3 LEDs

The following table describes the LEDs on the front panel of the H3C SecPath F1000-A
and describes how to read their status.

Table 1-2 LEDs on the front panel of the H3C SecPath F1000-A

LED
PWR0
PWR1
SYS
Item
44 × 436 × 430 mm (1.7 × 17.2 × 16.9 in.), excluding the
rubber feet
Rated voltage range: 100 VAC to 240 VAC, 50 Hz or 60
Hz
AC+AC
Max voltage range: 90 VAC to 264 VAC, 50 Hz or 60 Hz
Rated current: 1.5 A
Rated voltage range: – 60 VDC to –48 VDC
DC+DC Max voltage range: – 72 VDC to –36 VDC
Rated current: 1.5 A
100 W
0°C to 40°C (32°F to 104°F )
10% to 90%
Power supply unit (PSU) LED:
OFF means the PWR0 is not supplying power to the device; ON
means the PWR0 is supplying power to the device.
PSU LED:
OFF means the PWR1 is not supplying power to the device; ON
means the PWR1 is supplying power to the device.
System operating status LED:
On means the system is operating normally; OFF means the
system is operating abnormally.
Description
Description
1-3
Chapter 1 Product Overview