Figure 5-4 Set Up An Environment For Remote Uploading/Downloading - H3C SECPATH F1000-S,SECPATH F1000-S HOST Installation Manual

Installation Manual
H3C SecPath F1000-S Firewall
Step 1: Connect the PC to an Ethernet interface on the firewall.
Step 2: Assign an IP address, 10.110.10.10 for example, to the Ethernet interface on
the firewall.
Step 3: Assign an IP address, 10.110.10.13 for example, to the Ethernet interface on
the PC.
Step 4: Copy the application program/Boot ROM program/configuration file to a
directory, "C:\ version" for example.
Caution:
The IP addresses assigned to the network interface of the PC and the firewall must
reside on the same network segment.
Setting up a remote uploading/downloading environment using FTP
10.110.20.13/24 10.110.20.13/24 10.110.20.13/24
PC PC PC
(FTP Client) (FTP Client) (FTP Client)

Figure 5-4 Set up an environment for remote uploading/downloading

Step 1: Connect the PC to an interface on the firewall through the WAN. The PC and
the firewall can reside on different network segments.
Step 2: Copy the application program/Boot ROM/configuration file to a directory,
"C:\version" for example.
II. Enabling the FTP server
Follow these steps under the direction of service engineers to enable the FTP server:
Step 1: Configure an authentication method.
H3C SecPath F1000-S (FTP Server) H3C SecPath F100 H3C SecPath F1000-S (FTP Server)
WAN WAN WAN
Router Router Router
5-9
Chapter 5 Software Maintenance
0-S (FTP Server)
Ethernet interface Ethernet interface Ethernet interface
10.110.10.10/24 10.110.10.10/24 10.110.10.10/24