Table of Contents
Advertisement
Installation Manual
H3C SecPath F100-A Firewall
Flash memory
Physical dimensions (H × W × D)
Weight
Power supply
Max. power consumption
Operating temperature
Operating humidity (noncondensing)
Note:
Double data rate synchronous dynamic random access memory (DDR SDRAM) stores
the communication data of the running system with the CPU.
1.2.3 LEDs
Table 1-2 LEDs on the H3C SecPath F100-A firewall
PWR
SYS
LINK/ACT
100M
Item
LED
1-4
Chapter 1 Product Overview
Description
16 MB
44 × 436 × 330 mm (1.7 × 17.2 × 13.0
in.) (excluding feet)
4 kg (8.8 lb)
Rated voltage: 100 VAC to 240 VAC, 50
Hz or 60 Hz
Rated current: 1.5 A
54 W
0°C to 40°C (32°F to 104°F)
10% to 90%
Description
Power supply unit (PSU) LED: OFF
means the PSU is not supplying power
to the device. ON means the PSU is
supplying power to the device.
System operating status LED: Blinking
means the system is operating normally.
OFF means the system is operating
abnormally.
OFF means no link is present. ON
means a link is present. Blinking means
packets are being transmitted/received.
OFF means packets are being
transmitted/received at 10 Mbps on the
interface. ON means packets are being
transmitted/received at 100 Mbps on the
interface.
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the H3C SECPATH F100-A,SECPATH F100-A HOST,A and is the answer not in the manual?
Questions and answers