Interface Attributes; Panel And Interface Leds; Table 8-7 Interface Attributes Of The 1Gef/2Gef Module - H3C SECPATH F1000-S,SECPATH F1000-S HOST Installation Manual

Installation Manual
H3C SecPath F1000-S Firewall

8.6.3 Interface Attributes

Table 8-7 shows the interface attributes of the 1GEF and 2GEF modules.

Table 8-7 Interface attributes of the 1GEF/2GEF module

Attribute
Connector
Number of
connectors
Interface
standard
Trans
mitter
optical
power
Receiver
sensitivity
Central
wavelength
Optical fiber
Max
transmission
distance
Operating
mode
Note:
When using optical transceivers, select those that have been approved by our
company.

8.6.4 Panel and Interface LEDs

Figure 8-19 and Figure 8-20 show the panel of the 1GEF and 2GEF modules.
1GEF
SFP/LC
1
IEEE 802.3, 802.3u and 802.3ab
Multi- mode
Type short-haul
(850 nm)
Min –9.5 dBm
Max 0 dBm
–17 dBm
850 nm
62.5/125μm
multimode
fiber
0.55 km
(0.34 mi)
1000 Mbps full duplex
Chapter 8 Multifunctional Interface Modules
2
Single
mode Single
medium mode
-haul long-haul
(1310 (1310 nm)
nm)
–9 dBm –2 dBm
–3 dBm 5 dBm
–20 dBm –23 dBm
1310 nm 1310 nm
9/125μm
9/125μm
single
single
-mode
mode fiber
fiber
10 km 40 km
(6.2 mi) (24.9 mi)
8-13
2GEF
Single
Single
mode
mode
ultra-long
long-haul
haul (1550
(1550 nm)
nm)
–4 dBm –4 dBm
1 dBm 2 dBm
–21 dBm –22 dBm
1550 nm 1550 nm
9/125μm
9/125μm
single
single
-mode
mode fiber
fiber
40 km 70 km
(24.9 mi) (43.5 mi)