Panel And Interface Leds; Interface Cable; Figure 8-13 1Gbe Module Panel; Figure 8-14 2Gbe Module Panel - H3C SECPATH F1000-S,SECPATH F1000-S HOST Installation Manual

Installation Manual
H3C SecPath F1000-S Firewall
Operating mode

8.5.4 Panel and Interface LEDs

Figure 8-13 and Figure 8-14 show respectively the panel of the 1GBE and 2GBE
modules.

Figure 8-13 1GBE module panel

Figure 8-14 2GBE module panel

Table 8-6 describes the LEDs on the 1GBE/2GBE module panel and how to read their
state.

Table 8-6 LEDs on the 1GBE/2GBE module

LED
LINK
ACT

8.5.5 Interface Cable

I. Ethernet cable
The 1GBE/2GBE module uses a category-5 twisted-pair cable with RJ-45 connectors
(see Figure 8-15). Pins 1 and 2 of the connectors are for transmitting data, and Pins 3
and 6 are for receiving data.
Attribute
OFF means no link is present; ON means a link is present.
OFF means no packets are being transmitted/received on the interface;
blinking means packets are being transmitted/received on the interface.
Chapter 8 Multifunctional Interface Modules
1GBE
10/100/1000 Mbps, auto-sensing
Full/half duplex auto-negotiation
Description
8-10
2GBE