Incorrect Message Displayed When Mouse Hovers Over Upper Left Corner Of The Vm; Pool - Intel MFSYS25V2 Specification

Enterprise Platforms and Services Division
Product Intel® Modular Server System MFSYS25V2 with the Intel® Modular Server
Virtualization Manager feature activated.
Problem Modifying a VM may result in the VM not being displayed
Implication In rare cases, modifying the VM may result in the VM not being displayed.
However, no data is actually lost. The LV still exists in the storage pool. To
access the data stored on the LVs, a new VM will need to be created and
associated with the original logical volumes. During initial creation of VMs,
administrators are encouraged to record VM basic, install, advanced, network,
and storage tab information for each VM and to maintain this information for
each VM created.
Workaround If a VM is no longer displayed after modifying the VM, select the "Create VM"
action. On the Basic, Advanced and Network tabs enter the configuration
information for the missing VM. On the Install tab do not mount an ISO image.
On the Storage tab all unassigned LVs will be listed and available for selection.
It is important to note that when selecting the unassigned LV's, they must be
assigned to the same LUN (0, 1, 2, 3) as when originally configured. On the
Finish tab select create. The VM will now be displayed.
Status Fix
77. Incorrect message displayed when mouse hovers over upper left corner
of the VM Pool
Product Intel® Modular Server System MFSYS25V2 with the Intel® Modular Server
Virtualization Manager feature activated
Problem Message displayed when mouse hovers over the upper left corner of a VM
Storage Pool.
Implication Message displayed is not correct for selected VM Storage Pool. To view
"External Interface" information hover mouse over the link icon in the upper
right corner for the selected VM Pool. This message will be removed in future
release.
Status Fix
44
Specification Update