Reset Ethernet Switch Module From "Advanced Configuration" Will Not Generate; Reset" Event Log; Compute Module - Intel MFSYS25V2 Specification

Specification Update
the dates have been set during manufacturing. The CMM GUI is not able to
control the date and time of Ethernet Switch Module.
Implication This is a firmware Bug. No impact for functionality.
Status No Fix
48. Reset Ethernet Switch Module from "Advanced Configuration" will not
generate "reset" event log
Problem Reset works under Ethernet Switch's "Advanced Configuration" session, but no
event in GUI about a reset though.
Implication This is a firmware Bug. No impact for functionality. "Reset" will able to generate
reset event log when do it outside of "Advanced Configuration" session.
Status No Fix
49. The rKVM will be black screen when SUSE11 boot to login screen with
S5000SI Compute Module
Problem The rKVM will be black screen when SUSE11 boot to login screen with
S5000SI Compute Module.
Implication No impact on connecting the monitor directly to S5000SI board VGA port.
Workaround The SLES-11 S5000SI redirection works fine with Vesa and fbdev drivers
without any issue but user needs to force use to vesa drivers during SLES-11
installation time. Steps are:
1. Boot SLES-11 DVD or iso image
2. Force to use vesa driver giving following command initial grub screen:
"video=vesa".
You can also try with specify resolution color bits and refresh rates with
"video=vesa:1280x960-16@70"
3. Continue SLES-11 installation
Enterprise Platforms and Services Division
Intel Confidential 33