Microsoft Windows Server 2003* Cluster Support Not Available - Intel MFSYS25V2 Specification

Enterprise Platforms and Services Division
19. Ethernet Switch Module will fail to automatically update in an
operational chassis
Problem If an Ethernet Switch Module, not at FW level 1.0.0.27, is inserted into slot 1 or
slot 2 in a chassis that is in steady state (no FW updates in progress or
pending, and the chassis is just operating normally), the CMM's attempt to
update the FW on the switch will not succeed. The FW update page will show
that a FW update is 'pending'. Resetting or re-inserting the switch will not
correct the situation. The CMM must be reset. The FW update will be applied to
the switch when the CMM restarts. This applies to ESM1 and ESM2.
Note: This erratum applies only to ESM hot-insert. Installing P2.6 on a chassis
that already has an ESM that is not at FW revision level 1.0.0.27 will allow the
ESM to update without requiring a CMM restart.
Implication FW update will not complete.
Workaround Reset the CMM.
Status Fixed, V3.0
20.

Microsoft Windows Server 2003* cluster support not available

Problem Cluster support is not available for Microsoft Windows Server 2003* R2 SP2.
Implication Cluster support is not available to customers using Microsoft Windows Server
2003* R2 SP2.
Workaround There is currently not a workaround to this issue.
Status Fixed, V3.0, Reference Microsoft Windows Server 2003* (x86 and x64) Cluster-
Driver Installation BKM (E67062-002) for details.
22
Specification Update