Hdd Cache Enable Does Not Enable Hdd Cache With Ufu 10.3 And 10.4; Mouse Acceleration With Sles 11.X Over Virtual Kvm - Intel MFSYS25V2 Specification

Enterprise Platforms and Services Division
Workaround When POST code 0xF2 is encountered, first check that the installed memory
configuration is valid. If the specific memory error POST code is needed:







Status No Fix
61.

HDD cache enable does not enable HDD cache with UFU 10.3 and 10.4

Problem HDD cache enable does not enable HDD cache with UFU 10.3 and 10.4.
Implication Customer can not enable HDD cache with UFU 10.3 and 10.4.
Status Fix in next MFSYS25V2 UFU release.
62.

Mouse acceleration with SLES 11.x over Virtual KVM

Product Intel® Modular Server System MFSYS25V2 with the Intel® Modular Server
Virtualization Manager feature activated.
Problem SUSE Linux Enterprise* 11 mouse acceleration over virtual KVM
Implication During SUSE Linux Enterprise*11 installation over virtual KVM mouse
acceleration issues will occur.
Workaround After the operating system is installed go to Computer > Control Center >
Mouse > General tab and set Acceleration to lowest and set Threshold to
lowest.
Status No Fix
38
Extract blade.
Install BMC force update jumper.
Press front panel power button to power up blade.
Record the POST code.
Press front panel power button to power down blade.
Extract blade.
Remove BMC force update jumper.
Specification Update