Installing And Removing An Ethernet Switch Module; Figure 9. Installing An Ethernet Switch Module - Intel MFSYS25 User Manual

Installing and Removing an Ethernet Switch Module

The Intel
installed; optionally, a second switch module may be installed in the second switch
module bay.
Installing an Ethernet Switch Module
1. Review the safety and ESD information at the beginning of this manual and in the
appendices.
2. Locate an available switch bay and remove any installed module or filler panel.
3. Release and rotate the module retention lever out and away from the switch module
(see letter "A" in the following figure). Slide the switch module into the selected
module bay (see letter "B") until the bottom of the retention lever engages the bay.
Intel® Modular Server System MFSYS25 User Guide
®
Modular Server System MFSYS25 ships with one Ethernet switch module pre-
A

Figure 9. Installing an Ethernet Switch Module

B
AF002437
17