DIAGNOSTIC MESSAGE LIST (CONT'D)
DELIVERY TICKET PENDING
This message appears when a delivery has been terminated but a delivery ticket has not been
completely printed. When this occurs, it is assumed that the delivery is still active. No fields can be
changed until the delivery ticket has been entirely printed. Load a ticket into the printer and print the
delivery ticket by moving the Selector Switch to PRINT, or by pressing PRINT on the Lap Pad.
SHIFT TICKET PENDING
This message appears when a shift ticket is being printed. This is not an error condition.
FLOW ACTIVE
This message appears when a delivery has been initiated. This is not an error condition.
DELIVERY ACTIVE
This message appears when a delivery has been initiated. This is not an error condition.
GROSS PRESET ACTIVE
This message appears when a GROSS PRESET is active. The PRESET type must be set to GROSS
or BOTH and a desired amount entered in the GROSS PRESET field. This is not an error condition.
NET PRESET ACTIVE
This message appears when a NET PRESET is active. The PRESET type must be set to NET or
BOTH and a desired amount entered in the NET PRESET field. This is not an error condition.
GROSS PRESET STOP
This message appears when the GROSS PRESET amount has been reached. This is not an error
condition.
NET PRESET STOP
This message appears when the NET PRESET amount has been reached. This is not an error
condition.
TVC ACTIVE
This message appears when TEMPERATURE COMPENSATION is active on the current product.
This is not an error condition.
S1 CLOSE REACHED
This message appears when the S1 CLOSE value has been reached during a PRESET delivery. This
is not an error condition.
I NIT WARNING
This message appears when NO-FLOW TIMER or the ticket required fields return an error. If this
happens, the delivery can continue but the default values of 180 and YES are used.
END OF ERROR LIST
This message appears when the end of the error list has been reached. This is not an error condition.
ERROR MESSAGES
- APPENDIX C
49
Need help?
Do you have a question about the LectroCount LCR-II E36 Series and is the answer not in the manual?
Questions and answers