Finish - Spectra Logic Spectra 12K Install Manual

Rack mount

Hide thumbs Also See for Spectra 12K:

Table of Contents

Finish

1. Connect the host cables to the library.

Caution:

If the host computer and/or other equipment was restarted

while the library was disconnected, you must exit all programs

and shut down all equipment before reconnecting the library.

2. Switch on the AC power at the rear of the library and allow the library to initialize

completely.

3. Start the host system.

4. Enable your backup software.

This completes the library rack mount procedure.

If You Have Difficulty

If you need assistance, call Spectra Logic Technical Support at (800) 227-4637, or

(303) 449-0160. Inform the Support representative that you are rack mounting a

Spectra 12K or Spectra 20K library.

Rack Mount Installation Guide

Figure 48 The library in a standard 19-inch rack.

Table of Contents

Do you have a question about the Spectra 12K and is the answer not in the manual?

Spectra 20k