Finish - Spectra Logic Spectra 12000 Install Manual

Return the library to service
1. Return the library to its normal operating location.
Warning:
The library is very heavy. Get help when moving the library.
2. Switch on the AC power at the rear of the library.
3. Restart the host system.
4. Enable your backup software.
Caution:
If the host computer or and other equipment was restarted while the library
was away, you must exit all programs and shut down all equipment before
reconnecting the library.
You have now completed the Passive QIP installation.
If you have difficulty
If you need assistance with any part of this procedure, call Spectra Logic Technical Support at
800-227-4637 or 303-449-6444 extension 3175. Please inform the support representative that you
are replacing the Passive QIP in your Spectra 12000 or Spectra 64000 library.

Finish

Passive QIP Replacement Guide: Spectra 12000, Spectra 64000 15