Tally Dascom 2600 Service Manual page 88

Tally Dascom 2600 2610
6.3.8 Operating Problems and Solutions
Problem
The power does not turn on.
The printer is on but it will not
print.
Paper select lever error
• Check whether the mains voltage is correct.
• Make sure that the power cord is securely connected to both
the printer and the mains power outlet.
• Make sure that the power outlet is functional. If not, use other
outlet.
• Turn the power off. Wait a minute and then turn the printer on
again. If the printer still has no power, contact your dealer.
• Make sure that the Online indicator is lit.
• If you use the interface cable, make sure it is securely
connected to both the printer and the computer.
• Make sure paper is loaded.
• Run the printer Status Page. If printing executes normally, the
problem is caused by: the interface, the computer, incorrect
printer settings, or incorrect software settings.
• Make sure that the printer driver selected in your software is
the same as the emulation selected on the printer.
• If paper is loaded and the paper select lever is moved to the
incorrect position, the printer turns offline, and the buzzer
sounds continuously. Switch the paper select lever back to its
correct position.
81
Solution