Advertisement
Tally Dascom 2600 2610
3.2.28 Assemble the Ribbon Drive
Vertically press the Shaft D4.0 L27 into the Ribbon Drive Cover till the tip of the
Shaft levels with the Cover surface.
Put proper amount of grease on the Shafts of the Seesaw Bottom.
Put Gear M0.75/0.6 T22/13 on each Shafts of the Seesaw Bottom.
Couple the Seesaw Bottom with the Seesaw Top.
Fix the Clutch Shaft Assy.
45
Advertisement
Need help?
Do you have a question about the 2600 and is the answer not in the manual?
Questions and answers