Tally Dascom 2600 Service Manual page 87

Tally Dascom 2600 2610
6.3.7 Paper Handling Problems and Solutions
Problem
Paper cannot be loaded or fed.
Paper jams while loading.
Paper jams while printing.
Paper slips off the forms tractors
or the perforated holes of the
paper tear during printing.
• Make sure that the paper select lever located on the top right
of the printer is set correctly.
• Turn off the printer and remove the jammed paper. Remove
any obstructions from the paper path.
• Make sure that the Print Gap lever is set for the thickness of
your paper.
• Make sure that the paper is not folded, creased, or torn.
• Make sure that the left and right tractors are set so that the
continuous forms are stretched tightly.
• Turn off the printer and remove the jammed paper. Remove
any obstructions from the paper path.
• Make sure that the Print Gap lever is set for the thickness of
your paper.
• For continuous forms, make sure that the incoming and
outgoing paper stacks are correctly placed. Paper should feed
straight.
• Make sure that the forms tractors are positioned correctly for
the width of your paper and that the perforated holes of the
paper fit directly over the tractor pins.
80
Solution