Tally Dascom 2600 Service Manual page 84

Tally Dascom 2600 2610
6.3.4 Error Indications on LCD
LCD
Messages
Eject error
Hardware alarm
Head hot
Initializing
Load error
Loading default
Load paper
from
Parity error
Park position
Press any key
Self-test
Tear paper off
Switch paper
lever
The printer cannot eject the paper/advance it to park position.
Internal hardware error, contact your dealer or service technician.
The print head is too hot. The printer will reduce its print speed.
This message appears during the printer's initializing phase after
switching on the printer.
The printer fails to load the paper.
Factory defined parameters will be reloaded in all available menus after
switching on the printer.
The printer has detected paper end during operation/printer was
switched on with no paper loaded.
A parity error during data transmission is indicated.
Printer was switched on with no paper loaded.
The user is requested to press any key.
After power-on, the printer executes a short hardware self-test.
The user is requested to tear off paper which has been advanced to the
tear.
Choose correct paper path. Turn paper lever.
Meaning
77