Automatic Hold; Intercom Hold; Distinctive Flash Rate On Recall - NEC DSX PRODUCT DESCRIPTION Manual

Automatic Hold

Automatic Hold allows a user to be on an outside call, activate a feature, and automatically place the call on
Hold without first pressing the
presses CONF
call, to press another line key or a Call Coverage Key to automatically put their initial call on Hold.

Intercom Hold

A user can place an Intercom call on Hold. The Intercom call on Hold does not indicate at any other exten-
sion. There is no Hold Recall for Intercom calls.

Distinctive Flash Rate on Recall

System Hold and Exclusive Hold recall feature a distinctive flash rate for line keys (see the chart below).
This allows the keyset extension user to easily differentiate new calls that are ringing from held calls that
are recalling.
Call that you placed on Hold
Call that you initially placed on Hold
Call a co-worker placed on Hold at
Call a co-worker initially placed on
Hold recalling your phone
DSX Product Description
HOLD key. The system places a call on Hold automatically when the user
, INTERCOM , or a Hotline key. Automatic Hold optionally allows a user, busy on an outside
Distinctive Flash Rate on Recall
For this type of call:
recalling your phone
their extension
You see this flash rate:
System Hold
Single Wink On (green)
Double Wink On (green)
Single Wink On (red)
Double Wink On (red)
Exclusive Hold
Double Wink On (green)
Double Wink On (green)
None (On red)
Double Wink On (red)
Features ◆ 49